Walledoodle™ Application Instructions

Walledoodle™ peel-n-place and removable wall art affix to most wall smooth semi-gloss/gloss wall surfaces and can be removed without leaving any residues. 

Walledoodle™ peel-n-place is multi-use vinyl decal that can lose adhesive with over use and the attraction of dirt particles.  Simply peel the image from the sheet of material and let your child’s creativity flow as they move the sticker around to create their own wall mural.

Wall expressions are easy to install and costs less than wallpaper or painting.  This is particularly helpful when you are renting an apartment or sprucing up your dorm room because you will not damage the walls like you would with paint or wallpaper.  Wall expressions can be used at the office cubical, windows, glass, cabinets, picture frames, and of course interior walls.  These decals are intended to be removable and a one-time use and should be applied to a smooth surface.  The decals may not adhere to a heavy textured wall.

Wall Expression Application Instructions

The smooth wall surface can be cleaned with a mild soap and water, but the area needs to be completely dry.  Make your measurements where you would like your decal placed or use a level to help.  There are three layers to your wall expression decal.  The top cream colored layer is the transfer tape, the center is the vinyl decal, and the bottom is the paper backer.  Cut around the graphic you want to put on the wall from the sheet of material, slowly peel the backer off; once you have your measurements made.  If the graphic lifts from the transfer tape press it back onto the backer and rub with your hand.  Once the backer paper is off, simply hold the transfer tape with attached graphic with both hands.  Starting at one edge, slowly smooth with your hand until the image is down flat.  Then, with a straight edge, like a credit card or squeegee, rub the graphic to make sure the entire graphic is flat against the wall or surface.  Then slowly peel the transfer tape from the graphic and surface.  You can use a damp cloth to moisten the transfer tape, which will help to soften the adhesive and will make it easier to remove.
Again, if the graphic is lifting with the transfer tape, just rub the graphic with the straight edge to secure it to the surface.  Discard the transfer tape. Stand back and enjoy.